With double power of Brush vibration (6,000 times per minute) and Pulse Air, Brush Cleaner can wash difficult dirt, such as stains, yellowing, oil stains and fur. It has a built-in self-priming pump, and can be used for dry cleaning same as Brush Gun, and also can be used for semi-dry cleaning, water cleaning, draining and drying. It can operate continuously for one hour with small amount of water (10 liters per hour).
It can wash stubborn dirt on the corrugated surface or in the gap in a short time. Dirt moved to the brush or the cone can be removed in the semi-dry process. (self-cleaning) By using this brush, your work efficiency will be improved significantly.
Type | BC-10-2 |
Dimensions | W50 D300 H180 (mm) |
Dry Weight | approx. 600 grams |
Air Pressure | 0.5 to 0.8 MPa |
Amount of Mist | 10 liters/hour |
Fluid Type | Neutral |
Operating Temperature | 10 to 50 °C (50 to 122 °F) |
Brush Material | Nylon |
Connection Part | Male Coupler |
Brushing Cleaner (PDF : 900 KB)
(Adobe Reader required)
Do you have these experiences? "High pressure washing requires a lot of water (fluid), because it removes the dirt in the amount of water and water pressure.", "The cleaning area is narrow, so it takes a lot of time to wash wide area.", "The work is damaged by steam and pressure."
Sonic Spray Cleaner is a cleaning system with Pulse Air, can work only with the air of the compressor. By the effect of Pulse Air power, it can realize a strong cleaning capability. It can remove the dirt from the places difficult to clean up, such grooves, gaps, dents and oil stains. It can remove the dirt without scrubbing.
Model Name | Sonic Spray Cleaner |
Type | PSG-FG |
Dimensions | W230 D230 H450 (mm) |
Dry Weight | approx. 7 kilograms |
Air Pressure | 0.4 to 0.7 MPa |
Air Flow Rate | 160 to 180 L/min |
Capacity | 10 liters |
Operating Temperature | 10 to 50 °C (50 to 122 °F) |
Nozzle | The nozzle is not included. Please choose Optional Nozzle Unit for your purpose. Details of One Touch Nozzle Unit |
Demonstration movie of cleaning with the Blaster Nozzle equivalent. Please check the quantity of waste water.
[0:40] Cleaning of Dirt (Ultrasonic Binary Fluid Cleaner)
Using our specially developed two-step mixing technology, the high speed rotating nozzle generates ultrasonic wave. High speed rotating Pulse Air (5,000 times / min) apples the powerful air blow and it is realized a high-level cleaning capability. It can remove the water scale with a combination power of ultrasonic and Pulse Air without scrubbing.
At 0.8MPa of the air and water pressure, the water consumption is 50mL/min. Compared with the general high pressure washer (5,000mL/min at 30MPa), it is 1/100. The detergent does not required, you can wash only water.
What is the difference with general high pressure washer?
Movies New
Type | SPT-10T |
Dimensions | W400 D400 H420 (mm) |
Dry Weight | approx. 10 kilograms |
Air Pressure | 0.5 to 1.2 MPa |
Air Flow Rate | 500 to 700 liters/min |
Amount of Mist | 50 to 500 mL/min |
Fluid Type | Air, Pure Water, Neutral Detergent |
Capacity | 10 liters |
Operating Temperature | 10 to 50 °C (50 to 122 °F) |
Nozzle | The nozzle is not included. Please choose Optional Nozzle Unit for your purpose. Details of One Touch Nozzle Unit |
The Supersonic Tornado performs the cleaning in air, so you do not need to prepare the water treatment facilities. Because the water consumption is 1/50 to 1/100 as compared to high pressure washing, there is less influence of water in an electric system. It can wash the large object like a vehicle. Also can remove the water scale it is difficult to remove by general high pressure washer. After cleaning, switch off the fluid, you can perform the draining with Pulse Air in a short time.
You can switch three types of chemicals, water and air with the valve. It can be used for chemical cleaning, rinse and drying with one machine.
Dimensions | W600 D400 H540 (mm) |
Weight | approx. 10 kilograms |
Air Pressure | 0.5 to 0.9 MPa |
Air Flow Rate | 120 to 400 liters/min |
Amount of Mist | 0 to 200 mL/min |
Fluid Type | Air, Pure Water, Neutral Detergent |
Tank Capacity | Chemicals 1 liter, Water 10 liters |
Operating Temperature | 10 to 50 °C (50 to 122 °F) |
Power Supply | AC100V 50W |
Nozzle | The nozzle is not included. Please choose Optional Nozzle Unit for your purpose. Details of One Touch Nozzle Unit |